A caliper across two pin centres reads 12.70 mm, the side plate is stamped 40, and the OEM parts l...
-
ANSI Chain Sizes: Numbering Rule, Pitch in mm, and Common Sizing TrapsIndustry News Read More -
Ansi Chain Dimensions: Applications, Selection Criteria, and Practical GuidanceA 41 chain swapped into a drive built for 40 looks fine at assembly. It sits in the sprocket, it t...
Industry News Read More -
316 Stainless Steel Chain: Grades, 304 vs 2205, Load Data and Selection GuideA dairy washdown tunnel runs eight hours a day under caustic and nitric acid cleaning chemicals, t...
Industry News Read More -
316 Stainless Chain: Grades, Load Ratings, and Selection Tips for Wet or Chemical DutyA 316 stainless chain can cost several times what the same pitch costs in carbon steel, and on a d...
Industry News Read More -
304 Stainless Steel Chain: Grades, Load Limits, and Selection Guide for Wash-Down ServiceOn a ketchup filling line, a carbon steel roller chain lasted about nine months before rust pits in...
Industry News Read More -
48T Sprocket Guide: Dimensions, Speed Ratio and Selection Tips | FubangA 48T sprocket is a sprocket with 48 teeth, almost always working as the driven sprocket in a redu...
Industry News Read More

简体中文
English
русский
Español